Bell Home Security System PD-161, homeappliance

Download!

BF Apartment Station User Guide bellfree BF Colour Apartment Station View Pickup Display Contrast Mute Lock Ringer Volume Symbol Lamp Steady Flashing Mute on/off Red Apartment station is muted Door bell – All flash Pickup / end Blue Call in progress Ringing View / camera select Lock Green Door is open Touch to release lock Bell System (Telephones) Ltd PD-188 Issue 1 BF Apartment Station User Guide Call sequence When the resident's address is entered followed by the call button the addressed apartment station will ring and its blue pickup / view lamp will flash highlighting the pickup and view symbols. The apartment station will continue to ring for typically up to 30 seconds or until the resident responds by touching the view symbol (see silent viewing below) or the pickup symbol. After using the pickup symbol the resident can freely converse with the visitor whose image is now displayed on the apartment station; at the same time the green lock symbol will flash to highlight the lock function. The call may be terminated by touching the pickup symbol again or more usually by touching the lock symbol first to allow the visitor access through the entrance; the speech and picture will persist for a further 3 seconds while the door is being released. Silent viewing When the apartment station is ringing the resident can touch the view symbol to answer the call instead of the pickup symbol; this will stop the apartment station ringing and enable them to view the visitor for up to typically 60 seconds or until the lock symbol is touched to release the door. Silent viewing can be 'normalised' at any time by touching the pickup symbol and conversing with the visitor as described above. Apartment Station Controls The diagram in the introduction shows the apartment station and its controls. The default setting is ringer volume halfway (slide finger up and down) and contrast fully down. Ringer Mute The resident can mute the ringing sound in the apartment station when they do not wish to be disturbed. Ringer mute is activated by touching the mute symbol on the apartment station, which then illuminates in red as a reminder. Touching the mute symbol a second time will disengage the mute function. Ringer Mute only stops the audible ring, but the blue ring lamp will still flash and all other functions work normally. Ringer mute will continue for the pre-set time even if a call is answered. During installation it is possible to set a time limit for the mute function in various values from 2 minutes up to 10 hours or indefinitely. When this time period has elapsed the mute function will automatically disengage. Default timeout is indefinite. Door Status Indication (optional) The green lock lamp on the apartment station will illuminate to warn the resident that a door has been left open following a call. This feature requires a door monitor contact to be fitted. Door bell (optional) Pressing the door bell outside the flat rings (different sound to a normal call) the apartment station for a short period, flashing all buttons at the same time. Bell System (Telephones) Ltd PD-188 Issue 1