A.O. Smith Hot Water Storage Tanks T200V, homeappliance

Download!

Commercial Storage Tanks UNINSULATED STANDARD STOCK BARE STORAGE TANKS A. O. Smith commercial hot water storage tanks are designed for use with gas/electric water heaters and boilers to provide additional hot water storage capacity for systems with large hot water draws. A. O. Smith glass-lined storage tanks are designed and recommended for systems with operating temperatures up to 180°. PERMAGLAS® GLASS LINING ■ All internal surfaces exposed to water are glass-lined per ASME HLW procedures, using an NSF-approved glass-lining compound ■ Glass is highly resistant to effects of temperature, corrosion and electrolysis SIZES FROM 80 TO 1,000 GALLONS IN STOCK ■ All tanks in table on reverse side are normally carried in stock for immediate shipment, providing a fast solution for retrofit requirements HORIZONTAL OR VERTICAL MOUNTING ■ A. O. Smith standard stock tanks (except the T-80S, T-120S and TL-500A) are shipped factory standard with leg sockets for vertical installation, but are also designed to have the proper inlet/outlet openings that allow horizontal installation ■ For horizontal installations, optional tank saddles are required (TL-500A is horizontal only) T-325 ASME RETROFIT SPECIAL ■ The T-325 ASME (34 x 84) is designed to provide maximum storage capacity and fit through a 36" door MAGNESIUM ANODES ■ For extra protection against corrosion WORKING PRESSURES ■ Tanks tested at pressures assigned in accordance with working pressures shown in table on reverse side CUSTOM TANKS ■ In order to offer storage tanks for immediate shipping, the A. O. Smith Standard Stock Tanks are offered with only those openings and features shown in the following tables ■ A. O. Smith also offers a full line of custom tanks from 80 to 12,500 gallons built to meet your specifications and are available with many options such as various working pressures, lifting lugs, handholes, manholes, special linings, special openings, factory jacket/installation, and built to military specifications ■ For custom tanks, please see the A. O. Smith Custom-Line HD storage tank spec sheet MODELS T-80 THROUGH T-1000 (OPTIONAL) CRN Page 1 of 4 June 2008R AOSTT35300 Commercial Storage Tanks OPTIONS ■ ASME and National Board Certification sheets - furnished upon request ■ Tanks saddles - two per horizontal tank required FIVE-YEAR LIMITED TANK WARRANTY ■ For complete information, consult written warranty or contact A. O. Smith FIGURE 1 -T-80, T-120 NOTE:T-120 shown. FIGURE 2 - T-140 thru T-1000A TL-500 - Horizontal mounting only. No leg sockets. Page 2 of 4 www.hotwater.com AOSTT35300 Commercial Storage Tanks DIMENSION AND SHIPPING WEIGHTS Working pressure for Std. models T-80, T-120 and T-200: 150 psi Working pressure for ASME models T-140 and T-200 through T-1000: 125 psi OPTIONAL TANK SADDLES FOR HORIZONTAL TANK INSTALLATIONS HORIZONTAL TANK SADDLES B 5' (NOM.) A Page 3 of 4 www.hotwater.com AOSTT35300 Commercial Storage Tanks UNINSULATED STANDARD STOCK BARE STORAGE TANKS SUGGESTED SPECIFICATION Glass-lined storage tank(s) shall be A. O. SMITH glass-lined storage tank(s) or equal. Tank(s) shall be _" x _" and have a nominal capacity of _ gallons. Tank(s) shall have threaded openings as shown on drawings. Exterior of tank(s) shall be thoroughly cleaned and painted. Interior of tank(s) shall be glass-lined with an alkaline borosili-cate composition which has been fused to the steel base by firing at a temperature of 1600°F. All internal surfaces exposed to water are glass-lined per ASME HLW code procedures using an NSF- approved glass-lining compound. Cathodic protection shall be provided. The Storage Tank(s) shall have a working pressure of __psi. The Storage Tank shall have a five-year limited warranty as outlined in the written warranty. For Technical Information and Automated Fax Service, call 800-527-1953. A.O. Smith Corporation reserves the right to make product changes or improvements without prior notice. Page 4 of 4 www.hotwater.com AOSTT35300