American Standard Upgradable Deck-Mount Tub Filler T990.500, homeappliance

Download!

Installation Instructions DECK MOUNT T990.5XX TUB FILLERS COLONY DIVERTER & PERSONAL SHOWER TRIM KIT Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years. To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin. Certified to comply with ANSI A112.18.1 U.S. Patent No. D403,750 M968762 M918075-0070A HANDLE SCREW M918504-0070A ADAPTER SCREW M916803-0070A METAL LEVER HANDLE M961463-0020A HAND SHOWER 028667-0020A HAND SHOWER M918021-0070A ADAPTER 033760-0070A HAND SHOWER SEAL KIT M961460-0020A VALVE ESCUTCHEON HOSE AND SEALS (AVAILABLE WITH R890) M961464-0020A HAND SHOWER HOLDER 1 INSTALL DIVERTER VALVE TRIM REMOVE THE DIVERTER GUARD. Place the ESCUTCHEON SEAL over the DIVERTER BODY. Thread the VALVE ESCUTCHEON into the DIVERTER BODY. Align the HANDLE STEM with the SLEEVE as necessary. Thread the VALVE ESCUTCHEON into the BODY until the ESCUTCHEON contacts the finished deck. DIVERTER GUARD HANDLE STEM ESCUTCHEON SEAL SLEEVE VALVE ESCUTCHEON FINISHED DECK 2 INSTALL HANDLE TRIM Turn HANDLE STEM fully clockwise (Tub Filler position). Place the HANDLE ADAPTER on the HANDLE STEM. Install the ADAPTER SCREW and tighten securely. Position LEVER HANDLE and place on ADAPTER. Install the HANDLE SCREW and tighten securely. 3 INSTALL HAND SHOWER METAL LEVER HANDLE HANDLE SCREW ADAPTER SCREW ADAPTER HANDLE STEM Unscrew the HOLDER from the SHOWER ESCUTCHEON. Slip the SHOWER HOSE through the HOLDER and the SHOWER ESCUTCHEON. Insert a SEAL WASHER into the SHOWER HOSE CONNECTOR. Pull out the SLEEVE GUARD and HOSE. Unthread the SLEEVE GUARD from the HOSE END connection. Be careful not to allow the HOSE to fall back through the SLEEVE. Thread the SHOWER HOSE onto the HOSE END connection and tighten securely. SHOWER HOSE SLEEVE HAND SHOWER SEAL WASHER SHOWER HOSE HOLDER SHOWER ESCUTCHEON RUBBER RING GUARD Apply a sealant around the HOSE HOLE. SEAL WASHER HOSE END HOSE SLEEVE HAND SHOWER SEAL WASHER Thread the SHOWER ESCUTCHEON into the SLEEVE until the ESCUTCHEON contacts the finished deck. Loosen the SET SCREW in the SHOWER ESCUTCHEON and rotate the ESCUTCHEON towards the center of the tub. Retighten the SET SCREW. Thread the HOLDER into the SHOWER ESCUTCHEON. Insert a SEAL WASHER into the SHOWER HOSE connector and connect the HAND SHOWER. Place the HAND SHOWER into the HOLDER. HOTLINE FOR HELP For toll-free information and answers to your questions, call: 1 (800) 442-1902 Weekdays 8:00 a.m. to 7:00 p.m. Eastern Time IN CANADA 1-800-387-0369 (TORONTO 1-905-306-1093) HOLDER SLEEVE SET SCREW SHOWER ESCUTCHEON SEALANT M968762 Product names listed herein are trademarks of American Standard Inc. ©American Standard Inc. 2001