American Standard Upgradable Deck-Mount Tub Filler T991.732, homeappliance

Download!

TRIUMPH CADET® 3 RIGHT HEIGHT™ ELONGATED TOILET VITREOUS CHINA TRIUMPH CADET® 3 RIGHT HEIGHT™ ELONGATED TOILET ❑ 2492.016 • Vitreous china • EverClean™ anti-microbial surface which inhibits the growth of stain and odor causing bacteria, mold, and mildew • Low-consumption (6.0 Lpf/1.6 gpf) • 16-1/2" rim height for accessible application • Features the Cadet®3 Flushing System • Elongated siphon action jetted bowl • Fully-glazed 2-1/8" trapway with 2" ball pass • Generous 9" x 8" water surface area • Close-coupled tank with flat tank cover for superior storage • Oversized 3" flush valve with chemical resistant flapper • Chrome trip lever • Speed Connect™ tank-to-bowl coupling system • Sanitary dam on bowl with four point tank stabilization • 2 color-matched bolt caps • 100% factory flush tested • 5 year warranty ❑ 3016.016 Right Height™ Elongated Bowl ❑ 4007.100 Tank Nominal Dimensions: 768 x 472 x 784mm (30-1/4" x 18-9/16" x 30-7/8") Fixture only, seat and supply by others ) m 4 ( m Alternate Tank Configurations Available: 2 0 1 ❑ 4007.500 Tank complete with Aquaguard Liner Compliance Certifications - FINISHED WALL 25mm ± 6mm (1 ± 1/4) 237mm (9-5/16) 213mm 768mm (30-1/4) 464mm (18-1/4) C/L OF SEAT POST HOLES 140mm (5-1/2 CENTERS) 419mm (16-1/2) 356mm SUPPLY AS REQ'D. *203mm (8) 472mm (18-9/16) 784mm (30-7/8) *352mm (13-7/8) 238mm Meets or Exceeds the Following Specifications: • ASME A112.19.2M for Vitreous China Fixtures - includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions (8-3/8) 305mm (12) NOTES: (14) C/L OF OUTLET FINISHED FLOOR (9-3/8) *152mm (6) • Los Angeles Department of Water and Power Supplementary Purchase Specification for Non-Adjustability To Be Specified: ❏ Color: ❏ White ❏ Bone ❏ Linen ❏ Seat: #5325.010 Elongated Champion® Slow Close solid plastic seat and cover with easy lift off feature ❏ Seat: #5284.016 Elongated EverClean™ anti-microbial solid plastic seat and cover ❏ Seat: #5311.012 Elongated Laurel molded wood seat and cover ❏ Supply with stop: THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET. SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY. * DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided page MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES-CHECK LOCAL CODES. © 2007 American Standard Inc. Revised 08/07